Loading...
Search
en

cccjianguan's blog

At first I was just going to replace the electronics panel, but I got carried away. And at this point I’ve got a boat that I can’t start — because the engine instruments, and much else, are disconnected — in a slip that I’m just bumming until the real occupant’s yacht is launched (which accounts for slow posting here). But the project is going well, and I’m particularly pleased with the Azek expanded PVC celuka board product I’m experimenting with for the dash panel(s)…

Azek is not marketed for marine use, but I suspect it has many uses on boats. Compared to classic StarBoard solid polyethelene sheet, it’s lighter, stiffer, less expensive, and much easier to cut and shape with standard woodworking tools. (At least the latter also holds true for the traditional laminate and plywood panel that I’m replacing.) Azek also holds screws well, and you can weld pieces together with regular PVC plumbing glue. The only downsides I’ve seen so far is that it dents more easly than others — sort of like white pine — and the edges need to be hidden, both issues due to the fact that what’s between the mat skins is actually a very dense foam.

Of course where you don’t see it, Azek can be used as is and should remain stable despite any sort of weather. That’s what it’s all about. Below, for instance, is a temporary mount for the FLIR thermal camera I tested last season. I whipped it up quite quickly and it held up fine on Gizmo’s mast head. The new dash panels will hopefully look a lot more finished…

While Azek sheet stock only comes in white, it is supposed to take paint well, even dark colors, if you use the right “VinylSafe” latex. (You can find details about paint recommendations and sheet stock in the Azek “Paint” and “Product” PDFs here.) You can see in the photo below that I already knocked some paint off when I was cutting holes, but I didn’t let it dry long enough and it will be easy to re-coat anyway. You can also gather from the size of the PVC “dust” how easily this stuff cuts with a big toothed blade or hole saw. Rasp and sandpaper are also effective and fast. Gizmo may get more electronics updates than average boats, but I believe every electronics panel (and cable run) should be designed for change. Here’s what the lower helm used to look like, by the way, and note that I’m also building a new overhead radio and stereo panel. Plus expanding the gadget space behind this dash, and redoing the flying bridge set up to some yet undetermined extent; Gizmo is going to the next level! Please let me know if you’ve had any experience with Azek or similar plastics, or just how you like to build dash panels. But right now I better get back to work.

The most common methods for Sintra board printing are Pop up displays – is an excellent way to attract traffic to your business at the most affordable price. Pop displays are easy and fast to assemble and can be customized to show any marketing message you want to deliver to your viewers.  board printing is also ideal for tradeshow exhibits that will make your booth stand out from the others. printing is a great alternative for framing your portraits, or artwork and businesses can benefit from these board prints by displaying them indoors and outdoors. The endurance of straight  printing is perfect for special events and wholesale signage that can repeatedly be used. They are also lightweight and can hold up well under numerous applications. Also, the colors print vibrantly on  board printing and are perfect for guiding and greeting signage. Combining color and strategic positioning can even boost your business sales. Since the ink in Sintra printing is water resistant, it works great for outdoor displays. Holes are easy to drill through the board to place in an exterior wall. UV print pvc board   works great for advertising your real estate property. They are eye-catching display signs that can be customized to your liking to display any message that will attract your customer’s attention in no time.

PVC Security Guard Cabins are manufactured after taking into consideration various portable housing needs & space efficiency to site security units. Whether you are looking for advice on security guard cabin design, PVC cabinet board made security guard cabins is one of the best choices providing a complete security solution. Security guard cabins are truly convenient, adaptable, transferable, simple to build, destroy and again build. Followings are the key factors that show great significance of PVC security guard cabins:-

Choosing new bathroom cabinets can be a daunting task. While a PVC cabinet board look and style plays a large role in the decision-making process, you also have to keep an eye on the costs.

 

With the average cost of a bathroom renovation costing $10,000 and the average lifespan of a bathroom being just 18 years, it makes sense to choose products that will last the lifespan of your bathroom. After all, 18 years is a very long time!

 

This is why the material of your bathroom cabinets is very important. The material that a bathroom cabinet is made from will determine its durability and therefore, lifespan.

 

But what is the best material for bathroom cabinets? Before I answer this question, you must remember that the material should be just as important as the overall look of the cabinet itself. With this in mind, manufacturers make bathroom cabinets only out of a few selected materials.

 

Today, we’ll take a closer look at some of the most commonly used materials used in bathroom cabinets. You’ll then know which material is the best and what cabinets you should look for.

Choosing new bathroom cabinets can be a daunting task. While a PVC cabinet board look and style plays a large role in the decision-making process, you also have to keep an eye on the costs.

 

With the average cost of a bathroom renovation costing $10,000 and the average lifespan of a bathroom being just 18 years, it makes sense to choose products that will last the lifespan of your bathroom. After all, 18 years is a very long time!

 

This is why the material of your bathroom cabinets is very important. The material that a bathroom cabinet is made from will determine its durability and therefore, lifespan.

 

But what is the best material for bathroom cabinets? Before I answer this question, you must remember that the material should be just as important as the overall look of the cabinet itself. With this in mind, manufacturers make bathroom cabinets only out of a few selected materials.

 

Today, we’ll take a closer look at some of the most commonly used materials used in bathroom cabinets. You’ll then know which material is the best and what cabinets you should look for.

 

In comparison to traditional plywood boards, PVC boards score better. Until recently we have seen plywood or chip/particle boards being used for many applications when building or repairing a house. However, more recently, architects and builders have started using 4x8 pvc foam board

 instead of plywood and this seems to be the smarter choice owing to many reasons.

PVC Foam Boards – Builders’ and Architects’ First Choice

PVC foam boards can replace all those applications in which traditional plywood is generally used. They can be used to construct wardrobes, cabinets, countertops and tables, doors, shutters and door-frames (single-door and double-door), back-panels of walls, classroom desks, and benches, partitions, louvers and windows, false ceilings, fences, garden furniture,  walls, office workstations, wall cladding, switch cabinets, interiors of yachts, control panels, signage, column wraps, etc., and many other things.

 

 

 

high density PVC celuka board 2mm features:

1. Environmental pollution-free, formaldehyde-free, lead-free, in line with EU environmental standards.

2. Weather resistance, heat resistance, acid and alkali resistant, not aging, available 50 years.

3. It can be recycled and reused. The waste can be recycled and reused. The texture is light, the transportation and storage are simple and the construction is convenient.

4. Add color masterbatch, the product can be made into a variety of colors.

5. With waterproof, moisture, mold, fire-retardant, antifreeze, anti-corrosion, anti-mite, anti-static, thermal insulation, noise, shock absorption and other properties.

6. Can carving, cutting, engraving, drilling, sawing, nailing, planing, sticking, folding, slotting, heat forming, heating bending and other processing performance.

7. Can use PVC glue adhesive, adhesive bonding, nail stitching and so on.

8. Surface energy UV flatbed printing, color printing, spraying, printing, enamel painting, screen printing, painting, 3D engraving, and other processes.

9. Non-toxic, odor-free, no paint; ideal substitute for wood, aluminum-plastic board, medium-density fiber board and composite board

10. Widely used in advertising display, engraving processing, screen partition, copper door aluminum door, waterproof bath cabinet kitchen cabinet manufacturing, etc., is a typical green building materials.

The global “PVC celuka board Market” report offers the analyzed data of the Celuka PVC Foam Board market in categorized view. The Celuka PVC Foam Board market offers a common platform with multiple opportunities to many firms, associations, industries, and other products and services providers , All Foam Products Co, S.M. Industries to compete among themselves by offering better products and acceptable services to the clients and expand significantly at the global level. The global Celuka PVC Foam Board market report offers summarized detail about the major market holding key contenders alongside the recent developing industries in the market relating to the revenue, demands, sales, and product quality.  Furthermore, The report presents a detailed segmentation General, Fire Retardent, Other, Market Trend by Application Aerospace, Automotive, Building and Construction, Commercial Transportation, Indu...

 

Tell me a day when you have not been to your kitchen! The kitchen is a space, which we use every day and hence needs a lot of maintenance. Kitchen furniture gets exposed to water, food stains, heat and what not! At the same time, it is required to maintain the cleanliness and hygiene of the kitchen. We need strong and durable materials that can withstand these problems as well as stand out aesthetically, so you enjoy and feel happy. For that, it is essential to know the pros & cons of PVC over wooden cabinets for your home kitchen.

 

Also Read: 9 Things to Keep in Mind While Planning Storage for Kitchen

As there are many options available in materials for the Kitchen cabinets. Categorizing them in two, one as a base material and other as surface finishes. The base material is the one we use for making shutters and the drawers. There are many base materials available in the market such as PVC boards, ply boards, WPC, particle boards, etc. Surface finishes on such material can vary depending upon our selection like laminates, veneer, paint etc.

 

PVC cabinet board are the most common boards used for home kitchen cabinets. Let us know more about the two before constructing or undertaking any new or renovation work.

 

Giving you the highest-quality and most professional-looking sign is our highest priority here . Not only do we offer incredible materials to print your design on, we also have chosen the best printing methods to make your design as vibrant and long lasting as possible. The advantages of different printing styles allow for customizable printing for any type of material, purpose, and size.

 

 

Three of the most popular used printing methods are UV print pvc board, screen printing, and offset printing. Each process is unique in its own right, providing for high-quality printing on a variety of materials. We’ve outlined each method below, showing you the diversity of the printing industry and how your products benefit from these state-of-the-art processes.

 

1. Building outdoor wall board, indoor decoration board, partition board in office and house.
2. Screen printing, flat solvent printing, engraving, billboard and exhibition display.
3. Chemical anti corrosion project, special cold project, environmental protection.
4. Architectural decorations and upholstery.
5. Sanitary-wares, kitchen cabinet, washroom cabinet.
1. We have more than 38 production lines, including over 16
PVC celuka board production lines, 12 Paper board production lines,10 Co-extrusion board production line and several Quartz stone lines.

2. Our monthly outputs of each board are 5,000 tons of PVC foam board, 4,00,000 pieces of Paper foam board, over 2,000 tons of Co-extrusion board series and more than 30,000 SQM of Quartz stone.

3. Our company holds the values of high quality, high efficiency, faithful cooperation and altogether win and establish strong relationships with all customers suppliers.

Pages: 1 2 »

Advertisement

advertisement

Quick Search

Basic
  •  
  •  
  •  
  •  
  •  
  •